Guangzhou Jianghetian Trading Co., Ltd.
Five Tips to Make Nail Stickers Submissive
Release time:
2021-07-03 12:34
Source:
View count:
74
I made a pair of beautiful nails with joy. I noticed that there were edges and corners on the sticker a few days later. I felt as if I had hurt 10000 points in my heart! In fact, this situation is not uncommon, not only the guests, manicurists are also very tired, the operation steps to further improve, the seal layer also rose, the edge is also wrapped, why will warp!
1Be careful when taking nail stickers
Be careful when taking nail stickers. If you use too much force, the sticker is prone to creases, which are also the cause of sticker warping.
Here, you can use fine tweezers to obtain stickers like eyelash tweezers to graft eyelashes. Please be careful not to take the sticker directly with your hands. That one creases very easily.
2, remove the floating rubber must be careful
Before applying the nail art sticker, be sure to dip the cotton paper with cleaning fluid and wipe the floating rubber on the surface after the nail polish. Paste floating will affect the firmness of the seal, and sometimes the position will be offset. Therefore, wipe clean every corner, remove the floating rubber, can make the sticker stick more firmly.
3. Please pay attention to the position of the seal
The layout of the sealing position not only affects the overall appearance, but also is related to the presence or absence of warpage. When determining the sealing position, do not approach the edges around the nail, especially the front end.
As we all know, the nail has a certain arc, the more the surrounding arc is larger, but due to the limited elasticity of the seal, the easier it is to bend around. The reason why it is not attached to the front end of the nail is because the front end of the nail is the most frequently used place in life. If the manicurist does not operate well, it is easy to cause the sticker to float and the front nail will fall off.
4, nail art stickers need to be firmly
Nail art stickers need to be firm! Stickers need to be strong! Stickers need to be strong! Say the important thing three times. The detail of compaction is often overlooked by manicurists. As long as the use of stickers, paste after the action must consolidate the sticker. In this way, in addition to preventing the position of the seal from shifting, it can also improve the adhesion between the seal and the nail surface. Xiaobian recommends a special pressure rod. The strength of the silicon pressure head is just right, and the nail surface will not be excessively damaged. Hold the seal firmly.
5, the upper phototherapy agent to improve persistence
After pasting the sticker, please be sure to cover the phototherapy rubber or reinforcing rubber. Please note that the sealing rubber cannot be replaced. The sealing rubber alone cannot fully guarantee that the sealing will not warp. If phototherapy rubber or reinforced rubber sealing sticker is used, the sticker will be very durable.
The above introduction is five tips to make nail art stickers obedient, if you need to know more, you can contact us at any time!
Previous page
More information
Follow WeChat
©2024 All Rights Reserved Guangzhou JHteam Trading Co., Ltd.