Guangzhou Jianghetian Trading Co., Ltd.
Sticker wholesale manufacturers tell you how to remove the stickers on the glass?
Release time:
2022-02-02 12:01
Source:
View count:
58
MostSticker WholesaleThe manufacturer's sticker is made of reusable adhesive material. But sometimes, the sticker on the glass is difficult to remove, no matter how you do it, there will be ugly glue marks; disposable stickers are particularly troublesome. In fact, you can use some household products to repeatedly scrub the labels and glue marks on the glass surface.
Sticker WholesaleManufacturer: Method 1: Hot water and soap
1. Soak the labeled glass object in hot soapy water. Soaking helps soften the vinyl in the sticker. Wait 10 to 30 minutes, gently wipe with your fingers, the sticker can be separated from the glass surface. Soapy water will dissolve the glue and break the bond between the sticker and the glass surface. If the glass object cannot be soaked in water, soak a towel or sponge in hot soapy water, and then cover the sticker on the glass.
2. Remove the label. Slowly remove the sticker with your fingers, or carefully pry up a corner of the sticker with a non-sharp knife and remove the sticker 1.1. Always choose a knife with edges that are not sharp to avoid scratching the glass surface. There are also special small blades on the market to help remove adhesive adhering to the surface of objects.
Sticker wholesale manufacturers: method 2: baking soda
1. Soak the stickers wholesale stickers in hot soapy water. Soaking helps soften the vinyl in the sticker. Wait 10 to 30 minutes, gently wipe with your fingers, the sticker can be separated from the glass surface. Soapy water will dissolve the glue and break the bond between the sticker and the glass surface. If the glass object cannot be soaked in water, soak a towel or sponge in hot soapy water and cover it with a glass sticker.
2. Remove the label. Slowly remove the sticker with your fingers, or carefully pry up a corner of the sticker with a non-sharp knife and remove the sticker 1.1. Always choose a knife with edges that are not sharp to avoid scratching the glass surface. There are also special small blades on the market to help remove adhesive adhering to the surface of objects. Sometimes, the stickers can be easily removed after soaking in hot soapy water.
3, sticker wholesale manufacturers: mix the same amount of baking soda and cooking oil. X Research Source Soda Powder is non-toxic, natural and harmless to children and pets in the home. People often use it as a cleaning agent to remove stains and dissolve grease. X Research Source: After mixing soda and cooking oil into a paste, it can be easily applied to the surface of an object. You can choose any cooking oil. Olive oil, canola oil or other vegetable oils are also possible.
4. Protect the area around the label. You don't want to get mixed up or damaged parts. Cover these parts with cloth or paper and seal the edges with paper tape. Materials to be protected include plastics, paints, wood and fabrics. Soda powder is relatively safe. If you accidentally fall on the surface or skin of these materials, as long as you wipe them off immediately, it will not cause any harm.
5. Apply the paste mixture to the glass surface. Wait a few minutes for the soda to work. If the sticker is sticky, you may need to stand all night.
6、Sticker WholesaleManufacturer: Wipe the mixture clean. At this point, you can erase completely softened stickers and residual glue with a little force. You can also use sandpaper or fine steel wool to increase friction. Be careful not to scratch the glass surface with excessive force.
Previous page
More information
Follow WeChat
©2024 All Rights Reserved Guangzhou JHteam Trading Co., Ltd.