Guangzhou Jianghetian Trading Co., Ltd.
Sticker wholesale manufacturers: sticker removal method
Release time:
2022-02-17 12:02
Source:
View count:
101
Sticker WholesaleManufacturer: sticker removal method 1, washing alkali
1. Inject hot water into the water tank or bucket and pour washing alkali. The amount of washing alkali depends on how much water you use. It should be between 120 ml and 240 ml. A solution consisting of washing alkali and hot water can dissolve the glue on the sticker and break the tight bond between it and the glass surface. Alkaline washing can cause skin inflammation, so don't forget to wear gloves when touching. Compared with the foam produced by baking soda and dishwashing liquid, the foam produced by washing with alkali and hard water has greater friction, so it can clean stains on the surface and clothes more effectively. Hard water is water that contains a lot of minerals.
2. Soak the object in the solution for 30 minutes. The length of soaking depends on the strength of the sticker; if necessary, you can even soak overnight.
3. Remove items from the solution. Because detergent soda is much more alkaline than soda, you should be able to erase or tear off the label easily. Be sure to wash items soaked in washing-up alkali, especially glass jars or glasses used to hold food.
Sticker WholesaleManufacturer: sticker removal method 2, heating
1. Sticker wholesale manufacturer: heating glass surface. Set the blower to high power and heat it against the sticker for 1 to 2 minutes. You can also put the object directly in the sun for several hours. Hot air will melt the glue on the sticker, but if the sticker is not removed immediately, the glue will cool and harden again. If you want to remove the sticker wholesale from the window, park the car in the sun for 2 to 3 hours. The glass or plastic article is heated with boiling water for about 15 seconds. If you want to remove a label on a flat surface, such as a lid, you can try to tear off the label while pouring boiling water on the back of the lid.
2. Sticker wholesale manufacturer: remove the label. Gently remove the label with your fingers. The temperature of the object is very high, so be careful not to burn your fingers. You can also pry a corner of the sticker with a blunt knife and slowly remove the sticker. Be sure to choose a knife that does not feel sharp so as not to scratch the glass surface.
3. Use soap, oil or any type of debonding agent. There may still be some stubborn offset printing on the surface of the object. You need to do more to remove it.
Sticker WholesaleManufacturer: sticker removal method 3, ethanol for disinfection
1, with paper towels, cotton balls, cotton sliver or cloth dipped in alcohol. This method is especially suitable for glass objects that cannot be soaked in the barrel, making it easier to clean afterwards. In view of the disinfectant alcohol easy to burn, should be used with special care. Do not use alcohol on stoves or heated areas. Ensure good ventilation during use.
2. Press and rub the label with something like an alcohol-filled paper towel. If the sticker still doesn't come off, you may need to repeat the previous steps. Disinfecting alcohol is a solvent and detergent. It can dissolve other substances, such as glue on stickers. Due to the failure of electronic products in water, alcohol has the characteristics of rapid volatilization, people often use alcohol to clean electronic products. Try pressing a wet paper towel against the sticker to fully absorb the alcohol.
More information
Follow WeChat
©2024 All Rights Reserved Guangzhou JHteam Trading Co., Ltd.